| Page: 1 2 | Rating: Unrated [0] |
-=* Need Help In Recording Mixes *=-
| Good [+1]Toggle ReplyLink» flo a répondu le Mon 17 May, 2010 @ 11:37pm |
 Coolness: 146300 | My Audiophile USB has 2 stereo inputs and 2 stereo outputs (each is analog or digital).
Works very fine to listen to music and record mixes, but the lag is huge (cannot mix in real-time, and cannot monitor input !). It also has MIDI input and output. But it's very old!!! |
| I'm feeling at home! right now.. | |
| Good [+1]Toggle ReplyLink» SourUltraFast a répondu le Tue 18 May, 2010 @ 4:12am |
 Coolness: 91365 | Originally Posted By DRTAKO
the old m-audios are great (audiophiles), if you have pci slots. Think that's what clown is talking about. Older PCI-based M-Audio are great! (delta 44/66 audiophiles, etc) But, somehow, their nu products/external stuff is very average if you ask me (sound quality and stability too) If you can get your hands on an EMU 0404, even better for the buck: better A/D conversion; not talking about specs here (both will offer at least 96KhZ/24 bits) but the conversion on EMU cards is just great (Xlink AD/DA used on pro-tools HD systems) they also have on board DSP plugins that aren't bad at all! The mixer/interface of the EMU (itself) is a bit more complicated than regular M-Audio/Avid/etc etc, but it's a good bargain for the buck. Don't be scared by the "creative soundlab" label, they bought E-MU off when the cie was dead. [ www.emu.com ] Still, EMU used to make grrreat samplers, stronger filters/FX than AKAI (Z-Plane filters and possible FX expansion that would it make it up to Ensoniq DP/4): [ www.keyboardmuseum.com ] back then and Creative re-opened their shop because there was some buisness op there. dunno about the clock, but trust me, sounds great and it's cheap and more than good for a 2 I/O analog 2 I/O spdif basic system(+MIDI). [ www.guitariste.com ] flo: about your lag: is it on a PCI (or straight to board) or is it FW/USB(1.1 or 2) ? |
| I'm feeling fuck it all. seriously right now.. | |
| Good [+1]Toggle ReplyLink» rawali a répondu le Tue 18 May, 2010 @ 10:15am |
 Coolness: 140660 | just thought about this... wouldn't it be dope to have a friggin send/return and/or insert for analogue inserts directly on the soundcard (I mean, as part of the dsp mixer... so no buffer)
Mik does the fireface do that? |
| I'm feeling lovely right now.. | |
| Good [+1]Toggle ReplyLink» flo a répondu le Tue 18 May, 2010 @ 11:10am |
| Coolness: 146300 | Originally Posted By SOURULTRAFAST
flo: about your lag: is it on a PCI (or straight to board) or is it FW/USB(1.1 or 2) ? Originally Posted By flo
Audiophile USB :) |
| I'm feeling at home! right now.. | |
| Good [+1]Toggle ReplyLink» SourUltraFast a répondu le Tue 18 May, 2010 @ 3:34pm |
| Coolness: 91365 | Originally Posted By RAWALI
just thought about this... wouldn't it be dope to have a friggin send/return and/or insert for analogue inserts directly on the soundcard (I mean, as part of the dsp mixer... so no buffer) Mik does the fireface do that? Yes. That is how we used to patch a few effect chains (outboard gear): Floating output to physical output to effect rack, back in an analogue input, all done on TotalMIX DSP so the only latency you'd get is on the DAW's input. |
| I'm feeling fuck it all. seriously right now.. | |
| Good [+1]Toggle ReplyLink» clown a répondu le Tue 18 May, 2010 @ 5:52pm |
 Coolness: 221740 | Originally Posted By DRTAKO
the old m-audios are great (audiophiles), if you have pci slots. Think that's what clown is talking about. YEAH,, that's it. .i was too lazy to find it.. lol.. it's an Audiophile Delta something or other.. still in great working shape !! :) |
| I'm feeling the other side right now.. | |
| Good [+1]Toggle ReplyLink» Nathan a répondu le Tue 18 May, 2010 @ 6:33pm |
 Coolness: 166520 | i record in SoundForge ..
it has a nice little meter, so i can test the levels before recording. i put everything fairly low, so that it doesn't peak, but still let it record at at least 3/4 of the volume meter, so i don't miss any frequs. i can change the volume after if necessary. then, i can export it as a wav, or mp3 of most any quality, and the mix itself is also saved in the program. easy ;) the hard part is actually getting my sorry ass to record a set :p |
| I'm feeling you up right now.. | |
| Good [+1]Toggle ReplyLink» crimson a répondu le Tue 18 May, 2010 @ 11:38pm |
 Coolness: 66400 | Originally Posted By ZOMBIE8MYBRAIN
the hard part is actually getting my sorry ass to record a set :p Hey sorry ass, record a set :P |
| I'm feeling ^^ right now.. | |
| Good [+1]Toggle ReplyLink» MelooDie a répondu le Wed 19 May, 2010 @ 2:28am |
 Coolness: 248400 | Originally Posted By V.2-1
Ok so I finally got a decent setup at home after years of mixing with Traktor and a f**king mouse and it's all hooked up to my PC. Martin Chuis pas une experte en recording, mais je record toujours avec Traktor. Au début je me demandais pourquoi le son était toujours pas enregistré fort, mais ya possibilité d'augmenté le mixing gain en 2 temps 3 mouvements en regardant vite dans les setting .. puis comme tu mixes déja avec le programme ca pourrait etre simple pour toi. Ensuite je le transfert le .wav avec *switch * en mp3 320 , ou moins tout dépendant de ton gout. C'est p-ê pas le top du top,mais bon moi ca me va :D Adobe Soundbooth pour les légers ajustages de sons ... |
| I'm feeling dj shitbag right now.. | |
| Good [+1]Toggle ReplyLink» v.2-1 a répondu le Wed 19 May, 2010 @ 3:18pm |
 Coolness: 159095 | Merci Mel. Non, je ne mixe plus avec Traktor depuis que j'ai des CDJs. Mais toi t'enregistre avec Traktor ? Tu mixe tu avec Final Scratch ou ben t'as tu un genre de contrôleur ou quelque chose ? Parce que sinon je catche pas pourquoi t'enregistre avec Traktor quand t'as des CDJs/tables tournantes.
C'est tu juste parce que t'es familière avec que tu prends ça ou... ? : ) |
| I'm feeling [__insert emotion here__] right now.. | |
| Good [+1]Toggle ReplyLink» MelooDie a répondu le Wed 19 May, 2010 @ 3:29pm |
| Coolness: 248400 | J'ai mal compris je croyais tu mixais avec traktor Scratch , comme moi. ( final scratch en passant c'est pas la même chose ,c'est faite par Stanton et non Native Instrument ) . Donc oui je mixe avec 2 Timecode Vinyls sur mes tables tournantes qui sont plugger sur la carte de son externe,soit audio 8 dj et le programme utilisé est Traktor .Donc de la bang ,ya le traktor Audio Recorder qui est très simple a utiliser! |
| I'm feeling dj shitbag right now.. | |
| Good [+1]Toggle ReplyLink» A.Singleton a répondu le Thu 20 May, 2010 @ 9:25pm |
 Coolness: 33925 | Originally Posted By RAWALI
just thought about this... wouldn't it be dope to have a friggin send/return and/or insert for analogue inserts directly on the soundcard (I mean, as part of the dsp mixer... so no buffer) Mik does the fireface do that? la m-audio fast track pro a 2 inserts. |
| I'm feeling like tweaking that drum kit right now.. | |
| Good [+1]Toggle ReplyLink» SourUltraFast a répondu le Fri 21 May, 2010 @ 2:32pm |
| Coolness: 91365 | Originally Posted By A.SINGLETON
la m-audio fast track pro a 2 inserts. If you know how to manage any soundcard with a proper mixer/direct monitoring manager, any card can have near zero ms. latency inserts. |
| I'm feeling fuck it all. seriously right now.. | |
| Good [+1]Toggle ReplyLink» nothingnopenope a répondu le Sun 23 May, 2010 @ 6:17pm |
 Coolness: 201200 | I find most USB cards suck for production use, but I haven't used many newer usb 2.0 ones (in theory there is ample bandwidth). Firewire cards, on the other hand, I find are quite good. The USB 1 cards were horrid, I sold that card off fast. |
| I'm feeling meow right now.. | |
-=* Need Help In Recording Mixes *=-
| Page: 1 2 |
[ Haut de la page ] |
Poster Une Réponse |
Vous devez être connecté pour soumettre une réponse.
[ Haut de la page ] |
