Supersoaker + Wd-40 + Fire = ??? - Page 1

Page: 1

Rating: Unrated [0]

Supersoaker + Wd-40 + Fire = ???

Good [+1]Toggle ReplyLink» neoform replied on Wed Aug 16, 2006 @ 11:03pm


Coolness: 339750	[ youtube.com ]

	I'm feeling pornofied right now..

Good [+1]Toggle ReplyLink» Screwhead replied on Wed Aug 16, 2006 @ 11:05pm


Coolness: 685675	I was totally expecting it to blow up. :(

	I'm feeling sleepy right now..

Good [+1]Toggle ReplyLink» neoform replied on Wed Aug 16, 2006 @ 11:22pm


Coolness: 339750	ditto.. oh well

	I'm feeling pornofied right now..

Good [+1]Toggle ReplyLink» ufot replied on Thu Aug 17, 2006 @ 5:47pm


Coolness: 93185	it wouldn't blowup, because there's a pressure valve so that the pressure built inside the tank isnt lost completely when you pull the trigger... the only way that could remotely happen is if u kept the flame on too long and the valve melted, thereby letting fire run up the tube into the tank... not that I know this from experience or have ever made my own or anything... ahem... Ufot-cough cough

	I'm feeling antigravitational right now..

Good [+1]Toggle ReplyLink» Purple_Lee replied on Thu Aug 17, 2006 @ 5:51pm


Coolness: 238705	ya ...i c your point

	I'm feeling sinful want to play? right now..

Good [+1]Toggle ReplyLink» neoform replied on Thu Aug 17, 2006 @ 6:04pm


Coolness: 339750	Originally Posted By UFOT it wouldn't blowup, because there's a pressure valve so that the pressure built inside the tank isnt lost completely when you pull the trigger... the only way that could remotely happen is if u kept the flame on too long and the valve melted, thereby letting fire run up the tube into the tank... not that I know this from experience or have ever made my own or anything... ahem... Ufot-cough cough yeah, and that's exactly what i was expecting.... tying a burning cloth to the front of a plastic gun is almost certainly going to melt it..

	I'm feeling beersexed right now..

Good [+1]Toggle ReplyLink» ufot replied on Thu Aug 17, 2006 @ 7:29pm


Coolness: 93185	the valve is internal neo, not at the front of the barrel, I thought u would known that, arent u into science and stuff...psshh Ufot-hehe, program that

	I'm feeling antigravitational right now..

Good [+1]Toggle ReplyLink» neoform replied on Thu Aug 17, 2006 @ 7:32pm


Coolness: 339750	that doesn't stop it from melting the end, then having the liquid build up in the front causing a small explosion which would then set off the whole thing.. I remember a few years back i chucked a small bic lighter into a campfire (it was nearly empty).. 20 seconds later it let off a HUGE fireball explosion that made everyone jump back.. we're talking like 2ml of lighter fluit.. these geniuses filled the tank up a lot more than 2ml..

	I'm feeling beersexed right now..

Good [+1]Toggle ReplyLink» ufot replied on Thu Aug 17, 2006 @ 8:31pm


Coolness: 93185	ok... here we go neo, cause I know that u'll appreciate this. Though the tip of the barrel of the gun is made out of plastic, and you will most likely melt it, it would be next to impossible to melt it to a point of cutting off the fuel being propulsed through the barrel. And even if this impossible melting closure did occur, and the barrel filled with fluid, melting or melted plastic without an open flame, because the melted front of the barrel would extinguish the flame, would not be a sufficient enough temperature to explode the filled barrel... fewf, that was a heafty one-type... K now the lighter thing makes sense, cause once the outter plastic shell melted, well, then the fuel was exposed and boom... Ufot-explaining eplanations

	I'm feeling antigravitational right now..

Good [+1]Toggle ReplyLink» Wizdumb replied on Fri Aug 18, 2006 @ 3:22am


Coolness: 122395	that's so james bond

	I'm feeling slap happy right now..

Supersoaker + Wd-40 + Fire = ???

Page: 1

Post A Reply

You must be logged in to post a reply.