Rave Radio: Offline (0/0)
Correo electrónico: Contraseña:
Anonymous
Nueva cuenta
¿Olvidaste tu contraseña?
Page: 1Rating: Unrated [0]
Metal Rubbber?
Good [+1]Toggle ReplyLink» cactain_steef replied on Tue Jun 21, 2005 @ 4:21pm
cactain_steef
Coolness: 154780


Despite the name, Metal Rubber “contains just parts per million of metal yet conducts electricity nearly as well as a solid metal.” Its secret? chemical bonds that stretch apart but don’t break.

A Limber Future
“Smart skin” holds promise for morphing wings and wearable computers.




HOW TO MAKE METAL RUBBER (from scratch!):
dip charged substrate into a container of positively charged water-based solution (1). Rinse substrate in water to remove unbound particles (2). Dip substrate into negatively charged solution(3). Rinse, repeat (4,5).


[ www.popsci.com ] my beef jerky can beatbox better than your beef jerky!!!

Terrible, horrible things can be done to this millimeters-thick patch of shimmering material crafted by chemists at NanoSonic in Blacksburg, Virginia. Twist it, stretch it double, fry it to 200?C, douse it with jet fuel—the stuff survives. After the torment, it snaps like rubber back to its original shape, all the while conducting electricity like solid metal. “Any other material would lose its conductivity,” says Jennifer Hoyt Lalli, NanoSonic’s director of nanocomposites.

The abused substance is called Metal Rubber, and, according to NanoSonic, its particular properties make it unique in the world of material chemistry. As a result, the company’s small office has been flooded with calls from Fortune 500 companies and government agencies eager to test Metal Rubber’s use in everything from artificial muscles to smart clothes to shape-shifting airplane wings.
At this stage, however, NanoSonic is busy meeting the demand for its 12-inch-by-12-inch samples, which take custom-built robots up to three days to create. That’s speedy, if you consider that Metal Rubber, a product of nanotechnology, must be fabricated molecule by molecule.

The manufacturing process, called electrostatic self-assembly, starts with two buckets of water-based solutions—one filled with positively charged metallic ions, the other with oppositely charged elastic polymers. The robot dips a charged substrate (glass, for example) alternately from one bucket to the next. The dipping slowly builds up tight, organized layers of molecules, bonded firmly by opposing charges. Afterward the substrate is removed, leaving a freestanding sheet of Metal Rubber.
With investor interest booming, Metal Rubber could make its commercial debut within a year or so. Although shape-shifting aircraft wings and sensory robotic gloves are on the horizon, Metal Rubber will probably appear first in more humble, practical roles. Abuse-resistant flexible circuits and wires, for instance, could allow you to do terrible, horrible things to your portable electronics—consequence-free.
Good [+1]Toggle ReplyLink» basdini replied on Tue Jun 21, 2005 @ 5:03pm
basdini
Coolness: 145305
incredible
Good [+1]Toggle ReplyLink» Screwhead replied on Tue Jun 21, 2005 @ 6:41pm
screwhead
Coolness: 685695
That's fucking great! We've already got the wings from Batman Begins!
Good [+1]Toggle ReplyLink» michaeldino replied on Wed Jun 22, 2005 @ 12:50am
michaeldino
Coolness: 69080
i dont think that it can really work as well as they claim
all the lined up same-charge ions would repel each other... they cant form a straight line like that... or a plane of same-charge...
unless that their explanations of how they make it are a little OVER simplified... i think its impossible
Good [+1]Toggle ReplyLink» cactain_steef replied on Wed Jun 22, 2005 @ 2:24pm
cactain_steef
Coolness: 154780
lol pshhh.. excuuuse meeee.. it was in popular science, ok?
Good [+1]Toggle ReplyLink» basdini replied on Wed Jun 22, 2005 @ 3:25pm
basdini
Coolness: 145305
it must be true
Good [+1]Toggle ReplyLink» moondancer replied on Thu Jun 23, 2005 @ 5:40am
moondancer
Coolness: 92370
obviously they can and they did
Good [+1]Toggle ReplyLink» moondancer replied on Thu Jun 23, 2005 @ 5:40am
moondancer
Coolness: 92370
I want retractable wings :D
Good [+1]Toggle ReplyLink» moondancer replied on Thu Jun 23, 2005 @ 5:45am
moondancer
Coolness: 92370
even if the ions are repelling eachother in the line, they have the negative ions above and below which they are attracted to to keep them in place, and then maybe the lined up positive ones, being attracted to eachother, is what allows it to stretch back to its orinigal form so easily. Not that I know what I'm talking about but it seems to make sense.
Good [+1]Toggle ReplyLink» Screwhead replied on Thu Jun 23, 2005 @ 5:45am
screwhead
Coolness: 685695
Yeah... See.. They repell each other, but their still bound together by something. Tie up to people and make them walk in opposite directions doesn't make the rope just not exist, it's still there and holding them together..

Wings would rock. I'd love a trenchcoat that turned into wings. Or just had like the inside lined with rubber and the outside with that stuff so that I could electrically charge the outside like a giant taser.
Good [+1]Toggle ReplyLink» michaeldino replied on Thu Jun 23, 2005 @ 11:46am
michaeldino
Coolness: 69080
good point derf
Good [+1]Toggle ReplyLink» earthyspirit replied on Fri Jun 24, 2005 @ 12:04pm
earthyspirit
Coolness: 229780
now we just need transparent aluminum
Good [+1]Toggle ReplyLink» michaeldino replied on Fri Jun 24, 2005 @ 6:32pm
michaeldino
Coolness: 69080
transparent aluminum exists
[ www.ceradyne.com ]
[ www.rense.com ]
Good [+1]Toggle ReplyLink» earthyspirit replied on Fri Jun 24, 2005 @ 6:41pm
earthyspirit
Coolness: 229780
Star Trek eat your heart out. Kewl.
Metal Rubbber?
Page: 1
Post A Reply
You must be logged in to post a reply.