| Page: 1 | Rating: Unrated [0] |
A&h Xone Db4
| Good [+1]Toggle ReplyLink» Rakoon a répondu le Fri 1 Oct, 2010 @ 5:16pm |
 Coolness: 175525 | [ www.djtechtools.com ]
"Quad FX Core The heart of the Xone:DB4 is the powerful Quad FX Core DSP engine, enabling each channel to have its own FX bank and BPM detection system, which automatically adjusts all time-related FX and loops to the tempo of the music. There are 5 studio quality FX types optimised for DJ use – delays, reverbs, modulators, resonators and damage – plus each FX type has a patch library of different effect variations. Each FX bank has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers in the FX master section. Looper Each channel has a built-in looper, with selectable loop length from 1/16 beat to 4 bars.The :DB4 will always record the full 4 bars, so the loop can be expanded or shrunk at will. Filters Xone:DB4 comes equipped with the Xone dual filter system. Source select Each music channel can select any of the available stereo music sources: Analogue Line 1-4 (switchable to Phono on 2-3), Digital 1-4 or USB 1-4. EQ / Filter Each music channel has a 3-band EQ that can be configured as standard asymmetric EQ (+6/-25dB), Isolator (+6dB/OFF with a 24dB/octave slope), or reconfigured as a High-Pass/Low-Pass filter system with adjustable resonance. EQ knob pointers change colour to show which type of equalization is active. Mic/Line Input The Mic/Line input has 2-band EQ, gain, cue and mix level. This can also be routed to channel 1 for adding FX. Integral Soundcard A built-in, high quality (24-bit / 96kHz), multi-channel, fully patchable USB2 soundcard allows replay and recording from audio software for 4 stereo sends and 4 stereo returns." |
| I'm feeling breeeeee right now.. | |
A&h Xone Db4
| Page: 1 |
[ Haut de la page ] |
Poster Une Réponse |
Vous devez être connecté pour soumettre une réponse.
[ Haut de la page ] |
