Usted necesita una cuenta a fin de usar esta opción.
| Page: 1 | Rating: Unrated [0] |
Recording Problem!>?!>?
| Good [+1]Toggle ReplyLink» BA_Baracus a répondu le Fri 24 Jan, 2003 @ 12:21am |
 Coolness: 121100 | heres the set up,
mixer recording into computer (rca wire to back of computer), simple nuff? but for some reason recording messes with the cross fader, what i mean by that is the right side of the fader works fine on the main system but the sound in the computer (speakers +soundforge)is fucked (as if fader only works on 1 side), so i bought a new cross fader, same problem still... anyone have any ideas? suggestions? thanks lots+ ez+ |
| Good [+1]Toggle ReplyLink» neoform a répondu le Fri 24 Jan, 2003 @ 12:24am |
 Coolness: 339730 | which output are you using to go from your mixer to comp? |
| Good [+1]Toggle ReplyLink» clown a répondu le Fri 24 Jan, 2003 @ 9:50am |
 Coolness: 221830 | and also, what mixer are you using?? just to give us a visual.. a link to the mixer would be the best..
What software are you using also?? these are all HUGE factors.. The thing with recording is that there's always problems.. I get a BUZzzzz noise when i record on mine. |
| Good [+1]Toggle ReplyLink» BA_Baracus a répondu le Fri 24 Jan, 2003 @ 2:43pm |
| Coolness: 121100 | its coming out of the recording output in the mixer ((numark 1001x), the software is soundforge xp 4.5... |
| Good [+1]Toggle ReplyLink» Screwhead a répondu le Fri 24 Jan, 2003 @ 2:45pm |
 Coolness: 685655 | Here's an idea:
Double click the volume controll to get the full panel, click Options, then Properties, then change from Adjust Volume for: Playback, to recording, then hit OK. Look at the check boxes under the volume faders and make sure you've selected whatever source you're plugged into. |
| Good [+1]Toggle ReplyLink» BA_Baracus a répondu le Mon 27 Jan, 2003 @ 2:24pm |
| Coolness: 121100 | it must be the mixer cuz the prob still happens recording into a tape deck (not as loud tho)
thanks for the help tho... guess i gotta get it fixed |
| Good [+1]Toggle ReplyLink» Screwhead a répondu le Mon 27 Jan, 2003 @ 2:30pm |
| Coolness: 685655 | Maybe the wire is fucked up? That's been the source of countless problems trying to record stuff for me. |
| Good [+1]Toggle ReplyLink» BA_Baracus a répondu le Wed 5 Feb, 2003 @ 4:51pm |
| Coolness: 121100 | i dunno, cuz if i switch it over to record onto a tape deck prob still happens, must be the right channel, only thing is,if that was the problem, then when i reverse the xfader, problem should still happen on the opposite side no?
damn technology! |
| Good [+1]Toggle ReplyLink» Screwhead a répondu le Wed 5 Feb, 2003 @ 10:08pm |
| Coolness: 685655 | I don't think so. If it is the right chan. on just that one input, maybe you need the mixer fixed. |
| Good [+1]Toggle ReplyLink» Unknown User a répondu le Sun 9 Feb, 2003 @ 3:51pm |
 Coolness: 320 | change your RCA wire, i had that problem also by pulling on wires when moving equipment around and u shouldnt let wires heat over an amp or somethin
clown - u should check ur ground or else i got no clue |
Recording Problem!>?!>?
| Page: 1 |
[ Haut de la page ] |
Poster Une Réponse |
Vous devez être connecté pour soumettre une réponse.
[ Haut de la page ] |
