Supersoaker + Wd-40 + Fire = ??? - Page 1

Page: 1

Rating: Unrated [0]

Supersoaker + Wd-40 + Fire = ???

Good [+1]Toggle ReplyLink» neoform a répondu le Wed 16 Aug, 2006 @ 11:03pm


Coolness: 339685	[ youtube.com ]

	I'm feeling pornofied right now..

Good [+1]Toggle ReplyLink» Screwhead a répondu le Wed 16 Aug, 2006 @ 11:05pm


Coolness: 685610	I was totally expecting it to blow up. :(

	I'm feeling sleepy right now..

Good [+1]Toggle ReplyLink» neoform a répondu le Wed 16 Aug, 2006 @ 11:22pm


Coolness: 339685	ditto.. oh well

	I'm feeling pornofied right now..

Good [+1]Toggle ReplyLink» ufot a répondu le Thu 17 Aug, 2006 @ 5:47pm


Coolness: 93120	it wouldn't blowup, because there's a pressure valve so that the pressure built inside the tank isnt lost completely when you pull the trigger... the only way that could remotely happen is if u kept the flame on too long and the valve melted, thereby letting fire run up the tube into the tank... not that I know this from experience or have ever made my own or anything... ahem... Ufot-cough cough

	I'm feeling antigravitational right now..

Good [+1]Toggle ReplyLink» Purple_Lee a répondu le Thu 17 Aug, 2006 @ 5:51pm


Coolness: 238640	ya ...i c your point

	I'm feeling sinful want to play? right now..

Good [+1]Toggle ReplyLink» neoform a répondu le Thu 17 Aug, 2006 @ 6:04pm


Coolness: 339685	Originally Posted By UFOT it wouldn't blowup, because there's a pressure valve so that the pressure built inside the tank isnt lost completely when you pull the trigger... the only way that could remotely happen is if u kept the flame on too long and the valve melted, thereby letting fire run up the tube into the tank... not that I know this from experience or have ever made my own or anything... ahem... Ufot-cough cough yeah, and that's exactly what i was expecting.... tying a burning cloth to the front of a plastic gun is almost certainly going to melt it..

	I'm feeling beersexed right now..

Good [+1]Toggle ReplyLink» ufot a répondu le Thu 17 Aug, 2006 @ 7:29pm


Coolness: 93120	the valve is internal neo, not at the front of the barrel, I thought u would known that, arent u into science and stuff...psshh Ufot-hehe, program that

	I'm feeling antigravitational right now..

Good [+1]Toggle ReplyLink» neoform a répondu le Thu 17 Aug, 2006 @ 7:32pm


Coolness: 339685	that doesn't stop it from melting the end, then having the liquid build up in the front causing a small explosion which would then set off the whole thing.. I remember a few years back i chucked a small bic lighter into a campfire (it was nearly empty).. 20 seconds later it let off a HUGE fireball explosion that made everyone jump back.. we're talking like 2ml of lighter fluit.. these geniuses filled the tank up a lot more than 2ml..

	I'm feeling beersexed right now..

Good [+1]Toggle ReplyLink» ufot a répondu le Thu 17 Aug, 2006 @ 8:31pm


Coolness: 93120	ok... here we go neo, cause I know that u'll appreciate this. Though the tip of the barrel of the gun is made out of plastic, and you will most likely melt it, it would be next to impossible to melt it to a point of cutting off the fuel being propulsed through the barrel. And even if this impossible melting closure did occur, and the barrel filled with fluid, melting or melted plastic without an open flame, because the melted front of the barrel would extinguish the flame, would not be a sufficient enough temperature to explode the filled barrel... fewf, that was a heafty one-type... K now the lighter thing makes sense, cause once the outter plastic shell melted, well, then the fuel was exposed and boom... Ufot-explaining eplanations

	I'm feeling antigravitational right now..

Good [+1]Toggle ReplyLink» Wizdumb a répondu le Fri 18 Aug, 2006 @ 3:22am


Coolness: 122330	that's so james bond

	I'm feeling slap happy right now..

Supersoaker + Wd-40 + Fire = ???

Page: 1

Poster Une Réponse

Vous devez être connecté pour soumettre une réponse.